Influence of thermal and UV treatment on the polypropylene/graphite composite

Electrically conductive polypropylene/graphite (PP/graphite) composites were prepared via blending granulated PP with maleic anhydride grafted PP and natural graphite. Electrical conductivity of prepared samples containing either 65, 70, or 75 wt% of graphite was measured and the most conductive sample containing 75 wt% of graphite was exposed to UV irradiation for 1 and 24 h or thermally treated at 170 °C for 1 h. The influence of thermal and UV exposure on the structural and electrical changes in such treated samples was studied. Local current measurements on the surface were made using scanning spreading resistance microscopy and morphology of the surface was studied by atomic force microscopy. X-ray diffraction analysis, infrared and Raman spectroscopy were also used for the structural characterization. Properties of treated and untreated samples are compared and differences are discussed.     

GO/PVA nanocomposites with significantly enhanced mechanical properties through metalion coordination

In this study, a simple and efficient way is demonstrated to create strong interfacial interaction between graphene oxide(GO) filler and poly(vinyl alcohol)(PVA) matrix through metal ion coordination. The coordination bonding provides efficient load transfer during the tensile process, and enhances the mechanical properties of the nanocomposites significantly. After being coordinated with Cu(Ⅱ) ions, GO/PVA composites show much higher Young's moduli and yield stresses than pure PVA and noncoordinated GO/PVA. UV–vis and FTIR spectra are performed to confirm the successful coordination between GO and PVA. Ethylene diamine tetraacetic acid disodium salt(EDTA-2 Na) is used to confirm the important role of coordination in enhancing the composites. This research provides a new approach to manufacture polymer-matrix nanocomposites with significantly improved mechanical performances.     

Preparation and photochromic properties of pyrazolones/polyvinyl alcohol composite films

Novel photochromic composite films have been successfully fabricated by dispersing pyrazolone derivative:1,3-Diphenyl-4-(3-chlorobenzal)-5-hydroxypyrazole 4-phenylsemicarbazone (1a) into hydrosol of polyvinyl alcohol (PVA). The microstructure, photochromic behaviors and thermal bleaching properties were investigated by Raman spectroscopy, X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and ultraviolet-visible absorption spectroscopy (UV-vis). The results showed that 1a was not only blended but also well dispersed in the PVA polymer films with a suitable content of chromophore. Upon UV light irradiation, the composite films gradually changed from colorless to yellow and recovered fully to the initial state upon thermal bleaching. The time constants of photochromic reactions were almost the same as those of 1a observed in their crystalline state, indicating that the photochromic phenomenon is barely disturbed by the polymer matrix.     

Composite Likelihood Inference in a Discrete Latent Variable Model for Two-Way “Clustering-by-Segmentation” Problems

We consider a discrete latent variable model for two-way data arrays, which allows one to simultaneously produce clusters along one of the data dimensions (e.g., exchangeable observational units or features) and contiguous groups, or segments, along the other (e.g., consecutively ordered times or locations). The model relies on a hidden Markov structure but, given its complexity, cannot be estimated by full maximum likelihood. Therefore, we introduce a composite likelihood methodology based on considering different subsets of the data. The proposed approach is illustrated by simulation, and with an application to genomic data.     

Structural, optical and electromagnetic properties of aluminum-clay nanocomposites

Aluminum pillared and exchanged bentonite particles were synthesized by the ion exchange method. The characteristics of the particles were investigated by Fourier-transform infrared spectra (FTIR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), scanning electron microscope (SEM), electron dispersive X-ray spectrometer (EDS), reflectance spectrophotometer (RS) and electromagnetic transition instrument (ETI). FTIR spectra showed a successful incorporation of Al complexes into the clay interlayer. The TGA result demonstrated an improvement in thermal stability of the Al-pillared clay compared with the untreated particles. SEM and EDX results showed the presence of aluminum aggregates on the surface of clay. It was also found that Al ions affect electromagnetic properties of the clay particles.     

Amperometric detection of nitrite based on Dawson-type vanodotungstophosphate and carbon nanotubes

A nitrite sensor based on Dawson vanodotungstophosphates α₂-K₇P₂VW₁₇O₆₂·18H₂O (P₂W₁₇V) and carbon nanotubes (CNTs) was prepared by electrostatic layer-by-layer self-assembly technique. The sensor {PEI/PSS/[PDDA/P₂W₁₇V-CNTs]_n} was characterized by UV–vis spectroscopy, atomic force microscopy (AFM), scanning electron microscopy (SEM) and X-ray photoelectron spectra (XPS). The electron transfer and sensing ability of this sensor were explored using cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) technology. The results show that the incorporation of CNTs and P₂W₁₇V into the composite film endowed the modified electrode with fast transfer rate and high electrocatalytic activity towards oxidation of nitrite. This nitrite sensor with 10 bilayers has a broad linear range of 5 × 10⁻⁸ to 2.13 × 10⁻³ M, a low detection limit of 0.0367 μM (S N⁻¹ = 3), a high sensitivity of 0.35 mA mM⁻¹ NO₂⁻, an excellent anti-interference property in the presence of other potential interfering species and a good stable. It was successfully employed for determination of nitrite in real towards.     

Transport Studies with Composite Membrane by Sol-Gel Method

The preparation of polystyrene-based composite membrane at different pressures with varying amounts of material has been described. In order to understand the mechanism of transport of ions, membrane potential measurements were carried out using different concentrations of 1:1 electrolyte (KCl, NaCl, and LiCl) solutions and also to evaluate various membrane parameters such as mobility, distribution coefficient, and charge effectiveness controlling the transport phenomena. The membrane potential offered by the electrolytes is in the order of LiCl > NaCl > KCl, and the membrane is found to be cation selective. The large deviation in the value of K _± at the lower concentration of electrolytes was attributed to the high mobility of comparatively free charges of the strong electrolyte. Teorell, Meyer, and Sievers (TMS) method was used for the estimation of the thermodynamically fixed charge density of membranes. The data were then utilized to calculate membrane potential using the TMS theory. It was interesting to note that the theoretical predictions were borne out quite satisfactorily with experimental results.     

Micellar Catalysis of Composite Reactions—The Effect of SDS Micelles and Premicelles on the Alkaline Fading of Crystal Violet and Malachite Green

ABSTRACT

The effect of SDS micelles and premicelles on the reversible alkaline fading reactions of crystal violet and malachite green were studied. Micellar and premicellar catalysis models for 1-1 type reversible reactions were proposed. The rate constants of forward and backward reactions and equilibrium constants of these reversible alkaline fading reactions in SDS micellar solutions were obtained from a micellar catalytic model. Under the premicellar condition the average number of SDS molecules per substrate molecule with n surfactant molecules was obtained from a premicellar catalytic model. The results indicated that both SDS micelles and premicelles exhibited an inhibiting effect on the forward reaction, while they exhibited an accelerating effect on the backward reaction. These results can reasonably be accounted for in terms of electrostatic interactions.     

仿生制备有机-无机复合微囊固定化葡萄糖氧化酶

将层层自组装技术与仿生矿化技术相结合,由聚苯乙烯磺酸钠、聚二甲基二烯丙基氯化铵和二氧化硅成功制备(聚苯乙烯磺酸钠-聚二甲基二烯丙基氯化铵)₂-二氧化硅复合微囊.采用扫描电子显微镜、红外光谱和热重对微囊的形貌和化学结构进行了表征.以该复合微囊作为理想载体固定化葡萄糖氧化酶.结果表明,固定于复合微囊中的葡萄糖氧化酶的热稳定性、pH稳定性、操作稳定性得到了提高;在最适条件下,复合微囊固定化葡萄糖氧化酶的酶活回收率为72.85%,米氏常数是游离葡萄糖氧化酶的2.21倍.复合微囊在化学/生物催化、药物/基因传递系统和生物传感器应用方面具有一定的潜能.     

微波处理和溶胶凝胶法共同改性废胶粉及其与天然橡胶复合材料性能的研究

采用微波处理打断废胶粉(WRP)的三维网状结构用来提高WRP在有机溶剂中的溶胀性,然后采用溶胶凝胶法,将微波改性后的WRP浸入正硅酸乙酯中,通过水解反应和缩合反应,在WRP表面原位生成SiO2网络,从而制得改性废胶粉(MWRP).将制得MWRP与天然橡胶(NR)共混,制备了NR/MWRP复合材料,研究了NR/MWRP复合材料的性能.通过热重分析仪、差示扫描量热仪和力学分析表明微波处理最佳时间是20 s.由于微波处理提高了NR与WRP的相容性,原位生成的SiO2粒子起到了补强作用,所以所制备的NR/MWRP复合材料拥有较好的力学性能;随着Si69的加入,抑制了SiO2粒子聚集,提高了SiO2粒子的分散性,从而进一步提高复合材料的力学性能并降低复合材料的Payne效应;在进行频率扫描时,硫化胶的储存模量随频率的增大而增大;硫化胶的温度扫描结果表明,随着温度的升高,复合材料中SiO2粒子聚集程度加剧并且复合材料出现老化的现象.为了提高复合材料的耐老化性能,N,N-间苯撑双马来酰亚胺(BMI)作为一种防老剂加入复合材料中,BMI利用Diels-Aider反应补偿橡胶在老化过程中所损失的交联键并提高NR与WRP的界面相容性,从而提高复合材料的耐老化性能.